Multiple Spindle Oscillation Mortiser

Model No. UT/YOM-3,UT/YOM-4

>

Multiple Spindle Oscillation Mortiser

Outstanding Features:

  • This highly productive mortiser is designed for producing various mortises simultaneously.
  • Flexible head combination to meet specific job requirements.
  • Double tables on front and back sides, permitting both sides operations for increased efficiency.
  • Cutter speeds are frequency inverter controlled, providing variable speeds change.
  • The entire operation motions are conveniently controlled by simply pressing the foot switch.
  • Each carriage is adjusted independently.
  • Two speeds cutter oscillation permits high/low speed change.
  • Carriages slide on big steel rods. High speed cutter oscillation features maximum stability.
  • Mortise width and depth are adjustable.
  • The machine is designed for both mortising and drilling functions.
  • Carriages are well constructed for adjusting mortise width independently.

  • Multiple Spindle Oscillation Mortiser
  • Multiple Spindle Oscillation Mortiser

Feature

UT/YOM-3,UT/YOM-4

Multiple Spindle Oscillation Mortiser

YOM-3

  • 3~6 Head Configuration
  • 3 sets tilting carriages
Multiple Spindle Oscillation Mortiser

YOM-4

  • 4~6 Head Configuration
  • 3 sets tilting carriages
  • 1 set horizontal carriage
Multiple Spindle Oscillation Mortiser

Mortising Head

  • Mortising head is directly driven by an independent 1.8HP motor. Two cutters fitted on both ends of spindle perform both sides mortising simultaneously.
  • Mortising head position can be adjusted in right/left, up/down directions.
  • Collet chuck clamps /unclamps the cutter for quick tool change.
Multiple Spindle Oscillation Mortiser

Carriage

  • The machine is constructed of three tilting carriages and one horizontal carriage. Each carriage can be fitted with one or two mortising head as customer's requirement.
  • Each carriage can be tilted independently. Maximum tilting angle is 20°.
  • Picture shown model YOM-4 is equipped with three tilting carriages and one horizontal carriage.
Multiple Spindle Oscillation Mortiser

Variable Cutter Speed

  • The cutter running is controlled by a high performance frequency inverter, permitting for variable speeds adjustment. Wide speed range is from 6,000 to 12,000 RPM.
Multiple Spindle Oscillation Mortiser

Control Panel

  • All of machine motions are grouped in one control panel for operation convenience, including cutter oscillation, motor ON/OFF control, and clamping cylinder control etc.
Multiple Spindle Oscillation Mortiser

Independent Mortising Head Control

  • Each mortising head is controlled by an independent switch. The operator may adjust mortise position as desired for maximum flexibility.

Specifications

Model UT/YOM-3 UT/YOM-4
Numbers of carriage 3 sets 4 sets
Numbers of spindle 3~6 spindle 4~6 spindle
Max. mortise width 100 mm 100 mm
Max. mortise depth 50 mm 50 mm
Cutter diameter Ø6~Ø25 mm Ø6~Ø25 mm
Cutter shank diameter Ø16 mm Ø16 mm
Distance between spindles 90~1000 mm 90~1000 mm
Oscillation speed (2 speeds) 95 / 190 strokes 95 / 190 strokes
Spindle speeds 5000, 10000 R.P.M. 5000, 10000 R.P.M.
Tilted mortise angle 20° 20°
Spindle motor 1.8 HP 1.8 HP
Oscillation drive motor 1 HP 1 HP
Total horsepower  4.8 kw (6.4 HP) 6.2 kw (8.2 HP)
Working air pressure 6 kg/cm² 6 kg/cm²
Dust hood outlet diameter ø4" x 2 ø4" x 2
Net weight 1350 kgs 1450 kgs
Gross weight 1650 kgs 1750 kgs
Machine dimensions 2200x1420x1480 mm 2200x1420x1650 mm
Packing dimensions 2330x1600x1550 mm 2330x1510x1850 mm

• Specifications and design characteristics are subject to change without prior notice.

Specifications

Model UT/YOM-3 UT/YOM-4
Numbers of carriage 3 sets 4 sets
Numbers of spindle 3~6 spindle 4~6 spindle
Max. mortise width 100 mm 100 mm
Max. mortise depth 50 mm 50 mm
Cutter diameter Ø6~Ø25 mm Ø6~Ø25 mm
Cutter shank diameter Ø16 mm Ø16 mm
Distance between spindles 90~1000 mm 90~1000 mm
Oscillation speed (2 speeds) 95 / 190 strokes 95 / 190 strokes
Spindle speeds 5000, 10000 R.P.M. 5000, 10000 R.P.M.
Tilted mortise angle 20° 20°
Spindle motor 1.8 HP 1.8 HP
Oscillation drive motor 1 HP 1 HP
Total horsepower  4.8 kw (6.4 HP) 6.2 kw (8.2 HP)
Working air pressure 6 kg/cm² 6 kg/cm²
Dust hood outlet diameter ø4" x 2 ø4" x 2
Net weight 1350 kgs 1450 kgs
Gross weight 1650 kgs 1750 kgs
Machine dimensions 2200x1420x1480 mm 2200x1420x1650 mm
Packing dimensions 2330x1600x1550 mm 2330x1510x1850 mm
Top